Safety Instructions; Safety Warnings In The Manual; Safety Warnings On The Product - WEG MVW3000 Programming Manual

1 SAFETY INSTRUCTIONS

This manual contains the necessary information for the correct use of the MVW3000 frequency inverter.
It was written to be used by people with proper technical training or qualification to operate this kind of equipment.
This manual presents all the functions and parameters of the MVW3000, but it is not intended to explain every
possible application of the MVW3000. WEG will not take any liabilities for applications not described in this manual.
This product neither intended for applications whose purpose is to ensure physical integrity and/or life of people,
nor for any other application in which a fault of the MVW3000 may create a situation of risk to the physical integrity
and/or life of people. The designer who applies the MVW3000 must provide ways to ensure the safety of the
installation even in case of a failure of the servo drive.

1.1 SAFETY WARNINGS IN THE MANUAL

The following safety notices are used in this manual:
DANGER!
Not following the procedures recommended in this warning can lead to death, serious injuries and
considerable material damages.
WARNING!
Not following the procedures recommended in this warning can lead to material damages.
NOTE!
The text aims at providing important information for the complete understanding and proper operation
of the product.

1.2 SAFETY WARNINGS ON THE PRODUCT

The following symbols are attached to the product as safety warnings:
High voltages are present.
Components sensitive to electrostatic discharge. Do not touch them.
Mandatory connection to the protective earth (PE).
SAFETY INSTRUCTIONS
MVW3000 | 1-1
1