WEG CFW-09 User Manual page 278

CHAPTER 8 - CFW-09 OPTIONS AND ACCESSORIES
3. Press the board near to XC140 and on the lower right edge until the
connector and the plastic spacer is inserted completely.
4. Fix the board to the metallic spacer through the bolt (except ModBus RTU).
5. Fieldbus Connector:
Sizes 1 and 2 (Models up to 28 A):
- Fix the Fieldbus connector to the inverter frame by using the 150 mm (5.9 in)
cable (refer to figure 8.36).
Figure 8.36 - Fastening of the Fieldbus connector
279