Table of Contents
Advertisement
CHAPTER 5 - START-UP
ACTION
Press the
key to enter the
programming mode
Use the
and
select the motor rated power
Press the
key to save the
selected option and exit the
programming mode
Press the
key to go to the
next parameter
Press the
key to enter the
programming mode.
(Vector with Encoder only)
Use the
and
set the correct encoder PPR value.
(Vector with Encoder only)
Press the
key to save the
programmed value and exit the
programming mode.
(Vector with Encoder only)
Press the
key to go to the
next parameter
106
LED DISPLAY
LCD DISPLAY
Mo to r R ated
P404 = 5.0 HP
keys to
Mo to r R ated
P404 = 5.0 HP
Mo to r R ated
P404 = 5.0 HP
En coder
P40 5 = 1024 PPR
En coder
P40 5 = 1024 PPR
keys to
En coder
P40 5 = XXX X PPR
En coder
P40 5 = XXX X PPR
Ventilation Type
P4 0 6 = Self
DESCRIPTION
Enter the programming mode
HP
Selected Motor Rated Power:
7 = 5.0 hp/3.7 kW
HP
Exit the programming mode
HP
Encoder Pulses per Rotation (PPR)
Range:
0 to 9999
PPR
Enter the programming mode
PPR
Programmed Encoder PPR:
XXXX
PPR
Exit the programming mode
PPR
Motor Ventilation Type Selection:
0 = Self Ventilated
1 = Separate Ventilation
2 = Optional Flux
Vent.
(only for P202 = 3)
3 = Increased Protection
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
