WEG CFW-09 User Manual page 279

CHAPTER 8 - CFW-09 OPTIONS AND ACCESSORIES
280
Sizes 3 to 10 - (models up to 30 A):
- Connect the Fieldbus connector to the metallic "L" by using the 150 mm
(5.9 in).
- Fasten the set to the metallic support plate of the control board (refer to
figure 8.37).
Figure 8.37 - Fastening of the Fieldbus connector
6. Connect the other cable end of the Fieldbus connector to the electronic
Fieldbus board, as shown in figure 8.38.
DEVICENET
Figure 8.38 - Connection to the Fieldbus board
PROFIBUS DP