CHAPTER 8 - CFW-09 OPTIONS AND ACCESSORIES
250
3. Press on the EBA board (near XC3) and on the left top edge until com-
plete insertion of the connector and plastic spacer;
4. Secure the board to the metallic spacers with the screws provided;
5. Plug XC11 connector of the EBA board to the XC11 connector of the
(CC9) control board.
EBA BOARD
Figure 8.2 - EBA board layout
Figure 8.3 - EBA board installation procedure
CUTOUT
CUTOUT
EBA BOARD
CC9 Board
M3 x 8 Screw
1Nm Torque