WEG CFW-09 User Manual page 153

CHAPTER 6 - DETAILED PARAMETER DESCRIPTION
[Factory Setting]
Parameter
P216
ReferenceEngineering
Unit 2
P217
ReferenceEngineering
Unit 3
P218
LCD Display
Contrast Adjustment
P220 (1)
LOCAL/REMOTE
Selection Source
154
Range
Unit Description / Notes
Figure 6.24 -Copying the parameters from the "Inverter A" to the "Inverter B"
While the Keypad runs the reading or writing procedures, it cannot be
operated.
32 to 127 These parameters are useful only for inverters provided with a keypad
with LCD display.
[ 112 = p ]
-
The engineering unit of the speed reference is composed of three
characters, which will be displayed on the indication of the Speed
32 to 127
Reference (P001) and Motor Speed (P002). P207 defines the left
[ 109 = m ]
character, P216 the center character and P217 the right character.
-
For more details, refer to Parameter P207.
This parameter is useful only for inverters provided with a keypad with
0 to 150
LCD display.
[ 127 ]
-
It allows the adjustment of the LCD Display contrast. Increase/decrease
the parameter content to obtain the best contrast.
0 to 10 Defines the source of the LOCAL / REMOTE selection command.
[ 2 ]
-
INVERTER
A
Parameters
INVkeypad
P215 = 1
Press
EEPROM
Keypad
INVERTER
B
Parameters
keypadINV
P215 = 2
Press
EEPROM
Keypad