Table of Contents
Advertisement
ACTION
Press the
key
Use the
and
reach P100
Press the
key
Use the
and
set the new value
Press the
key
LED DISPLAY
LCD DISPLAY
Motor Speed
P002 = 0 rpm
keys to
Accel. Time
P100 = 5. 0 s
Accel. Time
P100 = 5. 0 s
keys to
Accel. Time
P100 = 6. 1 s
Accel. Time
P100 = 6. 1 s
NOTES:
(1) For parameters that can be changed with the motor running, the inverter
will use the new value immediately after it has been set. For the parameters
that can be changed only with motor stopped, the inverter will use this new
set value only after the
(2) By pressing the
value will be stored automatically and will remain stored until a new value is
programmed.
(3) If the last value programmed in the parameter is not functionally compatible
with other parameter values already programmed, an E24 - Programming Error
- will be displayed.
Example of programming error:
Programming two digital inputs (DIx) with the same function. Refer to table
4.2 for the list of programming errors that will generate an E24 Programming
Error.
CHAPTER 4 - KEYPAD (HMI) OPERATION
Comments
Select the desired parameter
Numeric value associated to the
(4)
parameter
Sets the new desired value.
(1) (4)
(1) (2) (3)
key is pressed.
key after the reprogramming, the new programmed
91
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
