WEG CFW-09 User Manual page 99

CHAPTER 5 - START-UP
ACTION
Press the key to enter the
programming mode
Use the and
select the type of control
Press the key to save the
selected option and exit the
programming mode
Press the keys or until
P002 is reached
Press the key
Press the Start key
Press the key and hold until
1800 rpm is reached
Press the FWD / REV key.
Obs.: The LEDs on the keypad show
whether the motor is running FWD
or REV.
100
LED DISPLAY
LCD DISPLAY
Type o f
P202 = V/F 60 Hz
keys to
Type o f
P202 = V/F 60 Hz
Type o f
P202 = V/F 60 Hz
Motor Speed
P002 = 0 rpm
Motor Speed
P002 = 0 rpm
Motor Speed
P002 = 90 rpm
Motor Speed
P002 = 1800 rpm
Motor Speed
P002 = 1800 rpm
DESCRIPTION
Enter the programming mode
con t rol
If the option V/F 60 Hz (value = 0) is
already programmed, ignore this
con t rol
action
Exit the programming mode
con t rol
Motor Speed (rpm)
This is a read-only parameter
Motor accelerates from 0 to 90 rpm*
(Minimum Speed), in the Forward (CW)
direction of rotation
* for 4 pole motors
Motor accelerates up to 1800 rpm*
* for 4 pole motors
Motor decelerates
then reverses the direction of rotation
accelerating back up to 1800 rpm
(1)
(2)
(3)
down to 0 rpm and