WEG CFW-09 User Manual page 122

[Factory Setting]
Parameter
P044
kWh Counter
P060
Fifth Error
Occurred
P061
Sixth Error
Occurred
P062
Seventh Error
Occurred
P063
Eighth Error
Occurred
P064
Ninth Error
Occurred
P065
Tenth Error
Occurred
P070
Current and
Motor Speed
P071 LCD: 0 to 65535
Command Word LED: 0 to FFFFh
P072 LCD: 0 to 65535
Fieldbus Speed LED: 0 to FFFFh
Reference
Range
Unit Description / Notes
0 to 65535 Indicates the energy consumed by the motor.
[ - ]
Indicates up to 65535 kWh, then it returns to zero.
1 kWh
If P204 is set to 4, the P044 is reset to zero.
This value remains stored even when inverter is turned OFF.
Indicates the numbers of the fifth, sixth, seventh, eighth ninth and tenth
0 to 71
occurred error, respectively.
[ - ]
-
Record Systematic:
Exy  P014  P015  P016  P017  P060  P061  P062 
0 to 71
P063  P064  P065
[ - ]
-
Ex: When the display show 0 (zero), this means E00, 1 (one) means
E01 and so on.
0 to 71
[ - ]
-
0 to 71
[ - ]
-
0 to 71
[ - ]
-
0 to 71
[ - ]
-
0 to 2600 Indicates simultaneously the motor current value (A) and the motor speed
[ - ] value (rpm).
0.1 A(< 100)
It is possible to use this parameter to change the speed reference (P121)
1 A(> 99.9)
when P221 or P222 = 0.
0 to P134
[ - ]
1 rpm
Shows the command word value set through the network.
The LCD display of the keypad shows the value in a decimal
representation, while the LED display shows the value in a hexadecimal
representation.
Shows the speed reference value set through the Fieldbus network.
The LCD display of the keypad shows the value in a decimal
representation, while the LED display shows the value in a hexadecimal
representation.
CHAPTER 6 - DETAILED PARAMETER DESCRIPTION
NOTE!
The LED display shows the speed.
123