And Dbw-02 Identification Label; Mechanical Installation; Dbw-01 And Dbw-02 Identification Label - WEG CFW-09 User Manual

CHAPTER 8 - CFW-09 OPTIONS AND ACCESSORIES
8.10.3.1 DBW-01 and DBW-02
Identification Label

8.10.3.2 Mechanical Installation

272
DBW Type
Rated Output
Data
Front View
A
Figure 8.23 - Identification label
The environmental operating conditions of the DBW are the same as of the
CFW-09 inverter (refer to item 3.1.1).
For panel installation, provide an additional airflow of 120 CFM (57 L/s) for
cooling of the braking module.
When installing module, provide free spaces around the module, as shown in
figure 8.24, where A = 100 mm (4 in), B = 40 mm (1.57 in) and C = 130 mm (5.12
in).
Figure 8.24 - Free spaces for cooling
Serial Number WEG Item N o
A - View