Safety Notices In The Manual; Safety Notice On The Product; Preliminary Recommendations - WEG CFW08 Vector inverter User Manual

1.1 SAFETY NOTICES IN THE
MANUAL
1.2 SAFETY NOTICE ON THE
PRODUCT
1.3 PRELIMINARY
RECOMMENDATIONS
SAFETY NOTICES
This Manual contains necessary information for the correct use of the
CFW-8 Variable Frequency Drive.
This Manual has been written for qualified personnel with suitable training
and technical qualification to operate this type of equipment.
The following Safety Notices will be used in this Manual:
DANGER!
If the recommended Safety Notices are not strictly observed, it can lead
to serious or fatal injuries of personnel and/or material damage.
ATTENTION!
Failure to observe the recommended Safety Procedures can lead to
material damage.
NOTE!
The content of this Manual supplies important information for the correct
understanding of operation and proper performance of the equipment.
The following symbols may be attached to the product, serving as Safety
Notice:
High Voltages
Components sensitive to electrostatic discharge. Do not touch them
without proper grounding procedures.
Mandatory connection to ground protection (PE)
Shield connection to ground
DANGER!
Only qualified personnel should plan or implement the installation,
start- up, operation and maintenance of this equipment. Personnel must
review entire Manual before attempting to install, operate or troubleshoot
the CFW-08.
DANGER!
The inverter control circuit (ECC2, DSP) and the HMI-CFW08-P are not
grounded. They are high voltage circuits.
CHAPTER 1
15