Sunroof Assembly - Subaru 2009 IMPREZA Service Manual

Hide thumbs Also See for 2009 IMPREZA:

SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)

4. Sunroof Assembly

When removing the clip, use great care not to

damage the roof trim.

1) Disconnect the ground cable from battery.

2) Remove the roof trim. <Ref. to EI-64, REMOV-

AL, Roof Trim.>

3) Disconnect the harness connector of sunroof

4) Remove the glass lid. <Ref. to SR-5, REMOV-

AL, Glass Lid.>

5) Remove the four drain tubes from frame assem-

6) Remove the assist rail bracket (front) (A) and as-

sist rail bracket (rear) (B).

7) Remove the curtain airbag module. (model with

curtain airbag module) <Ref. to AB-19, REMOVAL,

Curtain Airbag Module.>

8) Remove the bolts and nuts and remove the

frame assembly.

Sunroof Assembly

B: INSTALLATION

Be careful not to snag the harness.

Install in the reverse order of removal.

• Be sure to connect the harness connector.

• When installing the drain tube, insert it securely

into drain pipe.

15 mm (0.59 in) or more

C: DISASSEMBLY

1) Remove the sunroof motor. <Ref. to SR-7, RE-

MOVAL, Sunroof Motor.>

2) Remove the sunshade. <Ref. to SR-9, REMOV-

AL, Sunshade.>

Assemble in the reverse order of disassembly.