Table of Contents
Advertisement
If you are using automatic channel assignment, add the channels you need to avoid in the
automatic channel exclusion list.
Register each AP system operating within 35km (21.75mi) of any TDWR in the voluntary
WISPA-sponsored database at:
Exposure to radio frequency energy
WARNING!
limits, the device should be used in such a manner that the potential for human contact with the
antennas during normal operation is minimized. To avoid the possibility of exceeding the FCC
radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm
(8 inches) during normal operation.
Notice for Canada
The following notices apply to Canada:
This device complies with the limits for a Class B digital device and conforms to Industry
Canada standard ICES-003. Products that contain a radio transmitter comply with Industry
Canada standard RSS210 and are labeled with an IC approval number.
Cet appareil numérique de la classe B est conforme à la norme ICES-003 de Industry Canada.
La radio sans fil de ce dispsitif est conforme à la certification RSS 210 de Industry Canada
et est étiquetée avec un numéro d'approbation IC.
This device complies with the Class B limits of Industry Canada. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2) this device
must accept interference received, including interference that may cause undesired operation.
To reduce potential radio interference with other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for
successful communication.
Notice for the European Community
This device complies with the EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC
and R&TTE Directive 1999/5/EC. Compliance with these directives implies conformity to
harmonized European standards (European Norms) that are listed on the EU Declaration of
Conformity that has been issued by HP for this device.
Countries of operation & conditions of use
This device may be used in the following EU and EFTA countries: Austria, Belgium, Bulgaria,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Requirements for outdoor vs. indoor operation, licensing and allowed channels of operation apply
in some countries as described below.
NOTE:
The user must use the configuration utility provided with this device to ensure the channels
of operation are in conformance with the spectrum usage rules for EU and EFTA countries as
described below.
20
Regulatory information
www.spectrumbridge.com/udia/home.aspx
Although the radiated output power of this device is below the FCC radio exposure
Hide quick links:
Advertisement
Table of Contents
