Replacing The Projection Lens; Install The Filter Grille/Door - Christie Roadster User Manual

Maintenance
4.5 Replacing the
Projection Lens
STEP 1
STEP 2
4-14
Figure 4.9. Installing the Angled Air Filter (3.0kW models only)

4. INSTALL THE FILTER GRILLE/DOOR

Secure with the single top screw.
A variety of lenses can accommodate different throw distances and specific types of
installations. Refer to Section 6, Specifications for more details. To change a lens,
follow the steps below.

Turn off the projector, cool and unplug
NOTE: If necessary, a lens can be swapped out while the projector is running, but
this can result in dust being drawn into the projector. Avoid if possible.
Before removing or installing any lens, turn off the projector and allow the fans to
cool the lamp before unplugging the projector. Ensure that the lens cap is on.

Install the lens cap and press the lens release button
See Figure 4.10.
WARNING
Unplug the projector.
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-05 Rev. 1 (02-2010)