Replacing The Projection Lens - Christie DS+5K User Manual

Section 4: Maintenance
4.5 Replacing the
Projection Lens
4-10 User's Manual
Downloaded From projector-manual.com Christie Manuals
A variety of lenses can accommodate different throw distances and specific types of
installations. See page 6-1 for details. To change a lens, follow the steps below. No
tools are required for "compact" lenses shown.
STEP 1
Turn off the projector, cool and unplug
'
NOTE: If necessary, a lens can be swapped out while the projector is running, but
this can result in dust being drawn into the projector. Avoid if possible.
Before removing or installing any lens, turn off the projector and allow the fans to
cool the lamp before unplugging the projector. Ensure that the lens cap is on.
Figure 4.8. Lens Assembly
STEP 2
Install the lens cap and press the lens release button
'
See Figure 4.9.
Figure 4.9. Depressing Lens Release
WARNING
Unplug the projector.