Working With The Lamp - Christie Mirage S+14K User Manual

3.9 Working with
the Lamp
Downloaded From projector-manual.com Christie Manuals
Numbers Select Main Image
Use Numbers Select Main Image to use the
numeric keys #1-8 as input keys. This remapping
of the keypad (see right) can be particularly useful
with PIP displays, providing a convenient shortcut
for changing the primary (background) image
without first having to return to the Main menu. To
use the keys in this manner all of the time, even
with single displays, select Always. For normal
keypad function, select Never (default). Set to PIP
Only to use activate number keys only when PIP is
in use.
NOTE: Numbers Select Main Image keypad
functionality works only when menus are closed.
Whenever you install a new lamp in the
projector, access the Lamp menu to record
the lamp serial number in the projector's
memory. You can also choose a lamp mode
for regulating power and light output,
change optical aperture size, and access
other read-only information pertaining to
past and present lamps.
shows the number of hours
LAMP HOURS
logged on the current lamp. Whenever you
record a new lamp serial number this value
automatically resets to "0", where it begins to log time for the new lamp. NOTE:
Read-only. This information also appears in the Status menu.
is the serial number recorded for the current lamp. When you install a new
LAMP S/N
lamp and enter its serial number, the number will appear here. NOTE: Read-only.
Enter a checkmark for
LAMP MESSAGE
upon power-up when the lamp has reached the specified lamp limit and should be
replaced. Delete the checkmark to prevent display of this message—instead, when
your lamp expires, only the status display messages on the back of the projector will
provide the visual warning to replace the lamp.
NOTES: 1) It is recommended that the Lamp Message checkbox remain enabled. 2)
When a lamp warning message appears, press
message. The message will continue to appear upon power-up until you install a new
lamp.
Set to the number of hours you expect to log on the current lamp before
LAMP LIMIT
replacing it. This will trigger a lamp message on-screen (if enabled).
to enable a warning message that will appear
to temporarily cancel the
Roadster / Mirage S+ User's Manual
OPERATION
3-49