Removing And Installing Clutch Position Sender G476 - Volkswagen Golf Variant 2007 Service Manual

– Insert spacer -A- between clutch pedal and stop and press
clutch pedal to spacer.
♦ Length of spacer = about 40 mm (e.g.
– Engage master cylinder in mounting bracket -arrow 1- and
-arrow 2-.
– Press master cylinder operating rod -1- in
-direction of arrow- until retainer -2- engages audibly in clutch
pedal.
– Install mounting bracket
2.7 Removing and installing clutch position
sender -G476-
Special tools and workshop equipment required
♦ Hose clamps -3094-
2.7.1 Removing
LHD
– First check whether a coded radio is fitted. If so, obtain anti-
theft code.
– With ignition switched off, disconnect battery earth strap ⇒
Electrical system; Rep. Gr. 27 ; Disconnecting and connecting
battery .
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
1
/ 2 " socket)
⇒ page 25 .
6-speed manual gearbox 02S - Edition 07.2009
2. Repairing clutch mechanism
33