Volkswagen Golf Variant 2007 Service Manual page 99

– Install pendulum support with new bolts -arrows A-, -B- and
-C- ⇒ Running gear, axles, steering ; Rep. Gr. 40 ; Repairing
front suspension .
– Assemble exhaust system and attach exhaust system bracket
to subframe ⇒ Rep. Gr. 26 ; Removing and installing parts of
exhaust system .
– Bolt exhaust system strut -1-, if present, to gearbox and tighten
bolt -arrow- to specified torque ⇒ Rep. Gr. 26 ; Removing and
installing parts of exhaust system .
– Push connector -1- onto reversing light switch -F4- .
– Install starter, push on connector -arrow 2- and bolt on wire
-arrow 3- ⇒ Electrical system; Rep. Gr. 27 ; Starter .
– Install earth strap at upper engine/gearbox connecting bolt.
– Attach support -B- to gearbox.
– Press pipe/hose line -A- into retainer -B- on gearbox.
– Install cable support bracket on gearbox and tighten bolts
-arrows- to specified torque
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
⇒ Item 6 (page 70) .
3. Removing and installing gearbox
95