Volkswagen Golf Variant 2007 Service Manual page 45

– With ignition switched off, disconnect battery earth strap ⇒
Electrical system; Rep. Gr. 27 ; Disconnecting and connecting
battery .
– Remove complete air filter housing if it is over slave cylinder
⇒ Rep. Gr. 23 ; Repairing diesel direct injection system or ⇒
Rep. Gr. 24 ; Repairing injection system .
– Remove securing clip -arrow 1- for gear selector cable from
gearbox selector lever -A-.
– Pull gear selector cable from pin.
Metal relay lever
– Remove securing clip -arrow 2- for gate selector cable from
relay lever -B-.
– Pull gate selector cable from pin.
– Pull securing clip -arrow 3- off relay lever -B- and remove relay
lever.
Plastic relay lever
– Remove relay lever together with cable end-piece from gear‐
box ⇒ page 73 .
Continuation for all
– Remove gearbox selector lever -A- by removing nut
-arrow 4-.
– Remove cable support bracket from gearbox -arrows-.
– Then raise and secure gear selector cable and gate selector
cable.
– Remove retainer -B- from gearbox and pull it off pipe/hose line
-A-.
– Then remove gearbox support -arrow A-.
– Place a lint-free cloth under slave cylinder.
– Pull clip for pipe/hose line out of slave cylinder to stop.
– Pull pipe/hose line out of slave cylinder and seal opening.
– Remove slave cylinder -arrows B-.
Caution
Do not operate clutch pedal any more.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
2. Repairing clutch mechanism
41