Volkswagen Golf Variant 2007 Service Manual page 124

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
– Remove selector fork for 5th and 6th gears as follows:
– Cover openings with a cloth.
– Engage 5th gear -arrows 1- and -2-.
– Remove selector jaw for 5th and 6th gears -bolt A-.
– Then remove both bolts -B- for pivot pins.
– Pull out pivot pins.
– Remove selector fork for 5th and 6th gears.
– Unscrew -bolts A- for inner bearing races from input and output
shafts, engage 5th gear -arrow 1- and 1st gear -arrow 2- and
-arrow 3- for this.
– Input shaft and output shaft are locked when both gears are
engaged. Both bolts can now be loosened.
Note
If the shafts are to be reused, clean residual locking material out
of threaded holes using a thread chaser.
– Remove both bolts -arrows- for reverse shaft support bracket.
120
Rep. Gr.34 - Controls, housing