Volkswagen Golf Variant 2007 Service Manual page 39

– Clamp off supply hose to master cylinder using hose clamp to
25 mm ∅ -3094- .
– Release securing clip -2- with a screwdriver or a pointed object
and pull out of master cylinder to stop.
– Pull pipe/hose line -1- or plastic line out from master cylinder
and seal.
– Disconnect electrical connector -4-.
– Unclip clutch position sender -G476- from master cylinder
-arrow- and remove.
2.7.2 Installing
Install in the reverse order of removal, observing the following:
Note
Allocate all components according to ⇒ Electronic parts cata‐
logue "ETKA" .
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
2. Repairing clutch mechanism
35