Removing And Installing Clutch Position Sender G476 - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
– Attach retainer -2- to master cylinder operating rod -1-.
– Insert spacer -A- between clutch pedal and stop and press
clutch pedal to spacer.
♦ Length of spacer = about 40 mm (e.g.
– Engage master cylinder in mounting bracket -arrow 1- and
-arrow 2-.
– Press master cylinder operating rod -1- in
-direction of arrow- until retainer -2- engages audibly in clutch
pedal.
– Install mounting bracket
2.7 Removing and installing clutch position
sender -G476-
Special tools and workshop equipment required
30
Rep. gr.30 - Clutch
1
/ 2 " socket).
⇒ page 23 .