Assembly Overview - Condenser; Removing And Installing High-Pressure Sender G65 - Volkswagen Passat 2011 Workshop Manual

Passat 2011 ➤ , Passat Variant 2011 ➤
Heating, air conditioner - Edition 06.2017
2.2

Assembly overview - condenser

1 - Bolts
❑ Secure condenser to ra‐
diator
❑ 5 Nm
2 - Condenser with receiver
❑ 2 versions
3 - Radiator/cooler
❑ Removing and installing
⇒ Rep. gr. 19 ; Radia‐
tor/radiator fan; Remov‐
ing and installing radia‐
tor
4 - Receiver with dryer car‐
tridge
Note
Under certain conditions, it is no
♦
longer necessary to renew the
dryer cartridge each time the re‐
frigerant circuit is opened.
Please see ⇒ Air conditioning
system with refrigerant R134a;
Rep. gr. 00 ; Renewing compo‐
nents .
Depending on engine type, re
♦
ceiver may be fitted on left or
right of condenser.
❑ Removing and installing
desiccant cartridge
⇒ page 28
5 - Stone impact protection
grille for condenser
❑ Only on models with
heavy-duty running gear
6 - Fastener
❑ For stone impact protection grille
7 - Refrigerant line connection to condenser
8 - Bolts
❑ Secure refrigerant lines on condenser
❑ 12 Nm
2.3 Removing and installing high-pressure
sender - G65-
Special tools and workshop equipment required
22
Rep. gr.87 - Air conditioning system