Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
– Set gearbox housing in place and tighten hexagon head bolts
to 25 Nm and then turn 90° further.
1.2.2
Carrying out check measurement
– Set up measuring appliance and dial gauge.
– Rotate input shaft so that tapered roller bearings settle.
– Press input shaft in -direction of arrow-.
– Bearing play should be min. 0.01 ... max. 0.09 mm.
Note
If the bearing play cannot be measured, but input shaft play is
perceptible and the input shaft turns freely, the adjustment is ac‐
ceptable.
162
Rep. Gr.35 - Gears, shafts