Volkswagen Golf Variant 2007 Service Manual page 90

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
– Pull gear selector cable from pin.
Metal relay lever
– Remove securing clip -arrow 2- for gate selector cable from
relay lever -B-.
– Pull gate selector cable from pin.
– Pull securing clip -arrow 3- off relay lever -B- and remove relay
lever.
Plastic relay lever
– Remove relay lever together with cable end-piece
⇒ page 73 .
Continuation for all
– Remove gearbox selector lever -A- by removing nut
-arrow 4- (⇒ previous figure).
– Remove cable support bracket from gearbox -arrows-.
– Then raise and secure gear selector cable and gate selector
cable.
– Remove retainer -B- from gearbox and pull it off pipe/hose line
-A-.
– Then remove gearbox support -arrow A-.
– Remove slave cylinder -arrow B-, lay to side and secure with
wire. Do not disconnect pipes.
Caution
Do not operate clutch pedal any more.
– Remove earth strap at upper engine/gearbox connecting bolt.
86
Rep. Gr.34 - Controls, housing