5.6
Assembly sequence - Removing and in‐
stalling cover for gearbox housing and
5th and 6th gear
Note
Follow the working procedure described below if only the 5th
♦
and 6th gears have to be removed:
If the gearbox housing has to be removed, follow the working
♦
procedure: Dismantling and assembling gearbox completely
⇒ page 115
.
Special tools and workshop
equipment required
♦ Support plate -VW 309-
♦ Gearbox support -VW 353-
♦ Drift -VW 295-
♦ Drift sleeve -VW 244 B-
♦ Hot air blower -V.A.G 1416-
♦ Torque wrench -V.A.G
1331-
♦ -Zweiarmabzieher Kukko
210.1-
♦ -Stehbolzen M 8 x 100 mm-
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
5. Dismantling and assembling gearbox
109