Fitting position of cable tie for cables
– Wind cable tie -arrow- around the selector cables in a figure
eight and secure them as shown in figure.
2.8
Plastic relay lever
From 05.07, relay lever is made from plastic. 2 versions may be
installed.
♦ Relay lever with catch or
♦ Relay lever with clip
Comply with the following during removal and installation work:
•
To remove relay lever, first separate cable end-piece from
gate selector cable.
This will avoid damage to the gate selector cable
– Pull locking mechanism forward to stop in
-direction of arrow 1- and then lock by turning to left in
-direction of arrow 2-.
– Then push relay lever forwards (-in direction of arrow 3-).
Relay lever with catch -arrow 1-
– Press catch -arrow 1- down to stop and remove relay lever
together with cable end-piece. In the process, swing it in di‐
rection of operation.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
2. Repairing selector mechanism
73