Removing And Installing Master Cylinder - Volkswagen Golf Variant 2007 Service Manual

– Push pipe/hose line or plastic line -1- with seal -2- onto con‐
nection of master cylinder -4- until securing clip -3- engages
audibly.
– Test line by tugging on it.
– After removing hose clamp up to 25 mm ∅ -3094- , return
supply hose to its original shape, if necessary.
– Bleed clutch system
LHD
– Install battery ⇒ Electrical system; Rep. Gr. 27 ; Removing
and installing battery .
– If complete air filter housing was removed, install it ⇒ Rep.
Gr. 23 ; Repairing diesel direct injection system or ⇒ Rep.
Gr. 24 ; Repairing injection system .
2.5.3 Specified torques
Component
Mounting bracket to bulkhead
♦ Renew self-locking nuts.
Crash bar to steering column mounting
bracket (attachment with 2 bolts)
Crash bar to steering column mounting
bracket (attachment with 1 bolt)
♦ Renew bolts for crash bar
2.6

Removing and installing master cylinder

Special tools and workshop equipment required
♦ Pliers -T10005-
2.6.1 Removing
– Remove mounting bracket
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
⇒ page 42 .
⇒ page 25 .
6-speed manual gearbox 02S - Edition 07.2009
Nm
25
10
20
2. Repairing clutch mechanism
31