Removing And Installing Slave Cylinder - Volkswagen Golf Variant 2007 Service Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
❑ Insert with brake fluid
❑ Seals/O-rings are adapted to configuration of line connection
❑ Allocation ⇒ Electronic parts catalogue "ETKA"
13 - Pipe/hose line
❑ Pipe ⇒ Item 11 (page 39)
❑ Allocation ⇒ Electronic parts catalogue "ETKA"
❑ To remove, remove battery and battery tray ⇒ Electrical system; Rep. Gr. 27 ; Removing and installing
battery .
14 - Bracket
❑ Secured to retainer for ABS/EDL
15 - Bracket
❑ For ABS/EDL
16 - Seal / O-ring
❑ Pull onto line connection
❑ Insert with brake fluid
❑ Seals/O-rings are adapted to configuration of line connection
❑ Allocation ⇒ Electronic parts catalogue "ETKA"
17 - Clip
❑ Pull out clip to stop to remove and install pipe/hose line
18 - Slave cylinder
❑ Removing and installing
19 - Flange bolt, 20 Nm
20 - Bleeder valve
❑ Bleeding clutch system
21 - Dust cap
22 - Gearbox
23 - Bracket
24 - Hexagon bolt, 20 Nm
2.10

Removing and installing slave cylinder

Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1331-
2.10.1 Removing
– First check whether a coded radio is fitted. If so, obtain anti-
theft code.
40
Rep. Gr.30 - Clutch
and hose/pipe line may be in one piece
⇒ page 40
⇒ page 42
⇒ page 38
⇒ page 38