Removing And Installing Mounting Bracket - Volkswagen Golf Variant 2007 Service Manual

The crash bar -1- in front of clutch pedal -2- may be secured in
different ways.
Attachment with 2 bolts
– Install crash bar -1- and tighten the 2 bolts to specified torque
⇒ page 25 .
Attachment with 1 bolt
– Install crash bar -1- and tighten bolt -2- to specified torque
⇒ page 25 .
Continuation for all
– Mount cable guide -2- on steering column.
– Install footwell vent -3- ⇒ Heating, air conditioning; Rep. Gr.
80 ; Repairing heating .
Vehicles with knee airbag
– Install bracket for knee airbag together with crash bar ⇒ Inte‐
rior equipment; Rep. Gr. 69 ; Airbag; Removing and installing
knee airbag bracket .
Continuation for all
– Install trim and cover below trim on drive side ⇒ General body
repairs, interior; Rep. Gr. 68 .
– If disconnected, connect battery ⇒ Electrical system; Rep. Gr.
27 ; Removing and installing battery .
2.4.3 Specified torques
Component
Clutch pedal to mounting bracket
♦ Renew self-locking nuts
Crash bar to steering column mounting
bracket (attachment with 2 bolts)
Crash bar to steering column mounting
bracket (attachment with 1 bolts)
♦ Renew bolts for crash bar
2.5 Removing and installing mounting
bracket
Special tools and workshop equipment required
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
Nm
25
10
20
2. Repairing clutch mechanism
25