2.9
Assembly overview - hydraulics (RHD vehicles)
1 - Brake fluid reservoir
2 - Seal
❑ For plastic supply hose
❑ The seals must be loca‐
ted in supply hose
3 - Supply hose
❑ Rubber
❑ From 12.05, plastic in
some vehicles
⇒ page 38
4 - Master cylinder
❑ Removing and installing
⇒ page 31
5 - Clip
❑ Pull clip out to stop to re‐
move or install pipe line
❑ Pulled out to side on
some master cylinders
6 - Seal / O-ring
❑ Pull onto line connection
❑ Insert with brake fluid
❑ Seals/O-rings are adap‐
ted to configuration of
line connection
⇒ page 38
❑ Allocation ⇒ Electronic
parts catalogue "ETKA"
7 - Retainer
❑ To remove and install,
separate master cylin‐
der from clutch pedal
⇒ page 20
8 - Clutch pedal
❑ Removing and installing
9 - Hexagon nut, 25 Nm
❑ Self-locking
❑ Qty. 3
❑ For mounting bracket on bulkhead
❑ Always renew
10 - Bracket
❑ Secured to body
11 - Pipe line
❑ Pipe and hose/pipe line
❑ Allocation ⇒ Electronic parts catalogue "ETKA"
❑ To remove, remove battery and battery tray ⇒ Electrical system; Rep. Gr. 27 ; Removing and installing
battery .
12 - Seal / O-ring
❑ Pipe
⇒ Item 11 (page 39)
❑ Pull onto line connection
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
⇒ page 20
⇒ Item 13 (page 40)
may be in one piece
and hose/pipe line may be in one piece
2. Repairing clutch mechanism
39