2.3
Removing and installing gear knob and frame
1 - Emblem
❑ Can be carefully levered
off gear knob of plastic
or leather
2 - Gear knob
❑ With gaiter
❑ Gear knob and gaiter
cannot be separated
from one another
❑ Always renew together
❑ Removing and installing
⇒ page 61
3 - Clamp
❑ For securing gear knob
to gear lever
❑ Secure to gear knob
⇒ Item 2 (page 61)
hose clip pliers -V.A.G
1275-
❑ Always renew
4 - Frame for centre console
❑ In some equipment ver‐
sions, forms one part to‐
gether with centre con‐
sole
5 - Noise insulation
❑ Not fitted in all vehicles
❑ Arrow on noise insula‐
tion points in direction of
travel
❑ Locking lugs are ar‐
ranged at varying inter‐
vals
❑ Therefore it can be installed in only one position
2.4
Removing and installing gaiter with gear
knob and noise insulation
– Pull or carefully prise gaiter with frame for centre console up‐
wards out of centre console -arrows-.
Note
With some equipment variations, the gaiter must be levered off
along the front section.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
using
6-speed manual gearbox 02S - Edition 07.2009
2. Repairing selector mechanism
61