– Remove selector forks -A- together with selector plates.
– Unbolt reverse gear selector mechanism -B-.
– Remove nuts -B- for output shaft bearing support.
– Remove reverse gear -A-, input shaft -B- and output shaft
-C- one after the other from clutch housing.
– Remove differential.
5.7.2
Assembling gearbox
– Install differential.
– Always renew sealing rings -arrows- for output shaft bearing
support.
Note
The figure shows only 3 of the 4 sealing rings.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
5. Dismantling and assembling gearbox
123