– Remove pendulum support.
First remove bolt -arrow A- and then bolts -B- and -C-.
– Remove hexagon bolts -arrows- for left assembly mounting
from gearbox mounting.
– Tilt engine/gearbox assembly by lowering it via spindles of
support bracket -10 - 222 A- .
Note
Lower threaded spindle, shown here with adapter -10 - 222 A /
♦
16- , using winged nut, but not more than until spindle is flush
with nut -arrow-.
Be careful of all lines when lowering gearbox.
♦
•
Securing bolts -arrows- for gearbox bracket -A- must be ac‐
cessible.
– Remove gearbox bracket -A- -arrows-.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
3. Removing and installing gearbox
89