– Now remove 3rd bolt -arrow- for reverse shaft support bracket.
– Remove selector shaft with selector mechanism cover, placing
selector shaft in neutral position. Then remove bolts -arrows-
and pull selector shaft out of gearbox housing.
– Remove cover plate -A- and pivot pins -B- from underside of
gearbox.
– Remove pivot pins -A- on top side of gearbox and securing
bolts -B- for gearbox housing to clutch housing in area of dif‐
ferential.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
5. Dismantling and assembling gearbox
121