Volkswagen Golf Variant 2007 Service Manual page 92

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
6-speed manual gearbox 02S - Edition 07.2009
– Now attach hook -10 - 222 A /2- at rear left of engine -arrow-.
– Then connect hook -10 - 222 A /2- using adapter -10 - 222 A /
16- .
Continuation for all vehicles
– Position adapter -10 - 222 A /8- directly over wing bolting
points.
– Take up weight of engine/gearbox assembly on spindles.
– Raise vehicle.
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. Gr. 50 ; Noise insulation .
– Remove lower part of front left wheel housing liner ⇒ General
body repairs, exterior; Rep. Gr. 66 ; Wheel housing liner .
– Then remove all lines from gearbox.
– Remove drive shaft heat shield from engine -arrows-, if fitted.
Vehicles with 1.4 l petrol engine
– Separate exhaust system -arrows 1-, remove front exhaust
pipe and unscrew front exhaust pipe bracket from subframe
-arrows 2- ⇒ Rep. Gr. 26 ; Parts of exhaust system .
Vehicles with turbo diesel engines and vehicles with 2.0 l - 110 kW
petrol engines
– Separate exhaust system at double clamp and remove ex‐
haust pipe bracket from subframe ⇒ Rep. Gr. 26 ; Removing
and installing parts of exhaust system .
Continuation for all vehicles
– Disconnect drive shafts from flange shafts and tie up as high
as possible, being careful not to damage surface protection.
88
Rep. Gr.34 - Controls, housing