On-Hook (Confirming Remote Machine Response Prior To Transmission) - Fuji Xerox DocuCentre-II C3000 User Manual

Print
Prints the selected document.

On-hook (Confirming Remote Machine Response Prior to Transmission)

Use this feature when using Manual Send.
Manual Send is a transmission method that involves confirming the remote machine
response with an external telephone or when the machine is in an on-hook state prior
to beginning transmission.
In this case, it is recommended to have the line monitor volume set to "Loud".
Note • When an error occurs from the second page while sending multiple pages, the first page
The volume of the line monitor can be changed in the System Administration mode. For information on
how to change the default values, refer to "Line Monitor Volume" (P.269).
1
Pick up the receiver of the external
telephone or select [On-hook
(Manual Send/Receive)] on the
[Advanced Fax Features] screen.
2
Select any item.
Send / Receive
Switches between Manual Receive and Manual Send.
Manual Send: Confirms remote machine response prior to transmission
Manual Receive: Used for receiving fax manually, such as Facsimile Information
Services.
Alphanumeric
The [Keyboard] screen is displayed.
Specify destination using the
keyboard.
Note • When the line type is set to a
• Some touch-tone services may not be available even if you set your telephone to send
Symbol
The [Symbol] screen is displayed.
Specify destination using symbols.
Exit (Line Cut)
Cuts the line connected.
may end abnormally.
pulse line, [Tone (:)] does not
appear. If you want to send tones (or to use the touch-tone services) while using a pulse
line, select [Tone (:)].
tones.
Advanced Fax Features
143
4