Leica GPS1200 Series Technical Reference Manual page 180

Manage...\Data
Step Description
15. STORE (F1) stores the changes and returns to MANAGE Data: Job
Name.
An edited point retains the creation value for <Time:>.
Changing coordinates of a point which has been previously
used in other application programs, for example COGO, or
hidden point measurements does not update the application
results.
It may happen that a point with the same point ID exists in the job. If
the codes and/or attribute values of the new and the existing point do
not match, a screen opens where they can be corrected.
GPS1200 180
Refer to
chapter
11.5