Caliper Disassembly - Suzuki GW250 Service Manual

CALIPER DISASSEMBLY

• Remove the brake pads. (8-52)
• Remove the brake caliper holder 1.
• Remove the pad spring 2.
• Remove the rubber boots 3.
• Place a clean rag over the pistons to prevent it from popping
out and then force out the pistons using compressed air.

Fingers can get caught between piston and caliper
body when removing the piston.
Do not place your fingers on the piston when remov-
ing the piston.
Do not use high pressure air to prevent piston dam-
age.
• Remove the dust seals 4 and piston seals 5.
CHASSIS 8-55