Removal - Suzuki GW250 Service Manual

8-24 CHASSIS

REMOVAL

• Remove the combination meter and headlight assembly.
(9-27 and 9-36)
• Remove the front wheel. (8-8)
• Remove the front forks. (8-16)
• Remove the clamps 1.
• Disconnect the ignition switch coupler 2.
• Remove the brake hose clamp bolt 3 and cable guide bolt 4.
• Remove the front licence plate (only for P-12)
• Remove the headlight bracket 5.
• Remove the steering stem head nut 6 and washer.
• Remove the steering stem upper bracket 7.
• Remove the steering stem nut 8 using the special tool.
 09940-14911: Steering stem nut socket wrench
• Draw out the steering stem lower bracket 9.
NOTE:
Hold the steering stem lower bracket by hand to prevent it from
falling.
• Remove the dust seal 0 and upper bearing inner race A.
• Remove the steering stem upper bearing B and lower bear-
ing C.