Removal - Suzuki GW250 Service Manual

REMOVAL

HANDLEBAR LEFT SIDE PARTS
• Remove the rear view mirror 1.
• Remove the handlebar switch box 2.
• Disconnect the clutch lever position switch coupler 3.
• Remove the handlebar balancer 4.
• Remove the handlebar grip 5.
• Loosen the clutch lever holder bolt 6.
HANDLEBAR RIGHT SIDE PARTS
• Remove the rear view mirror 1.
• Remove the handlebar switch box screws 2.
• Remove the front brake master cylinder 3.
• Disconnect the brake light switch lead wires 4.
• Remove the handlebar balancer 5.
NOTE:
Do not turn the front brake master cylinder upside down.
HANDLEBAR
• Remove the left handlebar 1, cap 2 and clutch lever holder
3.
• Remove the right handlebar 4, cap 5 and throttle grip 6.
HANDLEBAR HOLDER
• Remove the handlebar holders 1.
CHASSIS 8-29