Suzuki GW250 Service Manual page 401

HEADLIGHT BEAM ADJUSTMENT
Adjust the headlight beam in the following procedures:
Adjust the headlight beam vertically.
POSITION LIGHT BULB REPLACEMENT
NOTE:
The right and left position light bulbs are installed symmetrically
and therefore the replacement procedure for one side is the
same as that for the other side.
• Remove the combination meter assembly. (9-27)
• Remove the position light socket 1.
• Replace the position light bulb 2.
• Reinstall the removed parts.
NOTE:
Properly fit the position light socket 1.
ELECTRICAL SYSTEM 9-37