Wiring Harness, Cable And Hose Routing; Wiring Harness Routing - Suzuki GW250 Service Manual

10-14 SERVICING INFORMATION

WIRING HARNESS, CABLE AND HOSE ROUTING

WIRING HARNESS ROUTING

Insert the front brake switch terminal firmly.
Fix the cover of the front brake switch terminal firmly.
Pass the left handlebar switch lead wire
behind the right handlebar switch lead wire.
Clamp
Right handlebar switch
Brake hose
Clamp
Ignition switch
Pass the left handlebar
switch lead wire into
the cable guide.
Left handlebar switch
Clutch cable
Clamp
Pass the left handlebar switch lead wire
to inside of the clutch cable.
Oil pressure switch
0 – 90°
Clamp
Wiring harness
Fixed clamp
IAP sensor #1
Cooling fan motor
coupler
Turn signal
relay
Clamp the wiring harness
at white tape position.
Face the lock part of
clamp inside.
Pass the HO2 sensor lead wire
to left side of the oil filter.
IAP sensor #2
Fixed clamp
Battery
PAIR control
solenoid valve
Injector #2
ISC valve
Fixed clamp
Injector #1
ECM
Fuse box
TO sensor
Battery terminal cap
terminal