Suzuki GW250 Service Manual page 91

REASSEMBLY
• Apply engine oil to the one way clutch 1.
• When inserting the one way clutch 1 into the guide 2, fit the
flange A in the step of the guide 2.
NOTE:
Be sure to seat the flange A of the one way clutch 1 to the
guide 2.
• When installing the guide 2 to the generator rotor 3, face the
groove B of the guide 2 inside.
• Apply thread lock to the bolts 4, and then tighten them to the
specified torque with the special tool.
 Starter clutch bolt: 26 N·m (2.6 kgf-m, 19.0 lbf-ft)
 99000-32110: THREAD LOCK CEMENT SUPER "1322"
 09930-44521: Rotor holder
or equivalent
ENGINE 3-43