Cylinder Head - Suzuki GW250 Service Manual

CYLINDER HEAD

DISASSEMBLY
• Remove the intake pipes 1 and cylinder head water outlet
pipe 2.
• Remove the oil gallery plugs 3 if necessary.
• Compress the valve spring using the special tools.
Compressing of the valve spring must be limited to
the extent only necessary to prevent the spring from
fatigue.
 09916-14510: Valve lifter
09916-14910: Valve lifter attachment
• Remove the two cotter halves 4.
 09916-84511: Tweezer
• Remove the valve spring retainer 5, inner valve spring 6
and outer valve spring 7.
• Pull out the valve 8 from the combustion chamber side.
ENGINE 3-27