Master Cylinder Removal And Disassembly - Suzuki GW250 Service Manual

MASTER CYLINDER REMOVAL AND DISAS-
SEMBLY
• Remove the right rear view mirror 1.
• Drain brake fluid. (8-54)
• Place a clean rag underneath the brake hose union bolt 2 on
the master cylinder to catch any split brake fluid.
Spilled brake fluid can damage painted surfaces and
plastic parts.
Be careful not to spill any fluid. Wipe spilled fluid up
immediately.
• Remove the brake hose union bolt 2 and disconnect the
brake hose.
• Remove the master cylinder assembly 3 and disconnect the
brake light switch lead wires 4.
• Remove the reservoir cap 5, plate 6 and diaphragm 7.
• Remove the brake light switch 8 and brake lever 9.
CHASSIS 8-59