Suzuki GW250 Service Manual page 400

9-36 ELECTRICAL SYSTEM
HEADLIGHT BULB REPLACEMENT
• Remove the combination meter assembly. (9-27)
• Remove the headlight mounting screws 1.
• Move the headlight assembly 2 forward.
• Disconnect the headlight coupler 3.
NOTE:
When removing the headlight assembly 4, disconnect the posi-
tion light coupler 5.
• Remove the rubber cap 6.
• Remove the headlight bulb 7 by unhooking the bulb holder
spring 8.
• Replace the headlight bulb 7.
• Reinstall the removed parts.
NOTE:
Properly fit the rubber cap 6.
• Tighten the headlight mounting screws 1 to the specified
torque.
 Headlight mounting screw: 6 N·m (0.6 kgf-m, 4.5 lbf-ft)