Turn Signal Relay Inspection - Suzuki GW250 Service Manual

9-42 ELECTRICAL SYSTEM
RELAYS

TURN SIGNAL RELAY INSPECTION

The turn signal relay 1 is located under the fuel tank.
If the turn signal light does not light, inspect the bulb or repair the
circuit connection.
If the bulb and circuit connection are OK, the turn signal relay 1
may be faulty, replace it with a new one.
NOTE:
When making this test, be sure that the battery is fully-charged.
STARTER RELAY INSPECTION
9-17
FUEL PUMP RELAY INSPECTION
5-5
COOLING FAN RELAY INSPECTION
7-9
SWITCHES
IGNITION SWITCH REMOVAL AND
INSTALLATION
REMOVAL
• Remove the headlight assembly.
• Disconnect the clamp 1 and ignition switch coupler 2.
• Remove the ignition switch 3 by removing the bolts 4.
INSTALLATION
• Install the ignition switch in the reverse order removal.
(9-36)