Removal And Disassembly - Suzuki GW250 Service Manual

7-14 COOLING AND LUBRICATION SYSTEM

REMOVAL AND DISASSEMBLY

NOTE:
Before draining engine oil and engine coolant, inspect engine oil
and coolant leakage between the water pump and crankcase. If
engine oil is leaking, visually inspect the oil seal and O-ring. If
engine coolant is leaking, visually inspect the mechanical seal
and seal ring. (7-16)
• Drain the engine coolant. (2-15)
• Drain the engine oil. (2-11)
• Remove the engine sprocket cover 1.
• Move the speed sensor bracket 2 and remove the dowel pins
3.
• Remove the water pump 4.
• Remove the air bleeder bolt 5.
• Remove the water pump cover 6.