Removal And Disassembly - Suzuki GW250 Service Manual

8-16 CHASSIS

REMOVAL AND DISASSEMBLY

NOTE:
The left and right front forks are installed symmetrically and
therefore the removal and disassembly procedure for one side is
the same as that for the other side.
• Remove the front wheel. (8-8)
* Make sure that the motorcycle is supported securely.
* Do not operate the front brake lever with the front
wheel removed.
• Remove the front brake caliper 1 and brake hose clamp bolt
2.
• Remove the bolts 3 or front reflex reflectors (only for P-24).
• Remove the front stabilizer 4 and front fender 5.
• Loosen the front fork upper clamp bolt 6 and handlebar
holder bolt 7.
NOTE:
Slightly loosen the front fork cap bolt 8 to facilitate later disas-
sembly.
• Loosen the front fork lower clamp bolt 9.
• Remove the front fork 0.
NOTE:
Hold the front fork by hand to prevent it from sliding out of the
steering stem.
• Remove the front axle pinch bolt (RH only).